Use and Care Manual

TECHNICAL DATA DIGEST

TITANIUM DRY

PRODUCT DESCRIPTION

TITANIUM DRY is a high performance alkali

resistant water-proofing paint, with a revolutionary

new technology of ultra small particle size

hydrophobic latex designed to water-proof a wide

variety of surfaces. Ultra White, ready mix paint

tintable to pastel colors using HARRIS designer

Colors. For exterior/interior (above or below grade

use).

COMPOSITION AND Titanium Dry is composed mainly of hydrophobic

PROPERTIES: acrylic latex and chalk resistance Titanium

Dioxide. Upon the many properties Titanium Dry

waterproofs concrete, brick, basements, concrete

blocks, stucco, foundations, retaining walls, water

ponds.

SIZES: 5-gallon and 1-gallon containers

FINISH: Flat 2-5% @ Geometry 60

◦

COLOR: White & Pastel

TECHNICAL DATA

CONSISTENCY: 105-110 KU'S (KREBS-STORMER)

FLASH POINT: Non-flammable

TOTAL SOLIDS (by weight): 58%

TOTAL SOLIDS (by volume): 39%

DRYING TIME: To touch: 1 Hour

To recoat: 5 Hours

` To cure 24 Hours

DRY FILM THICKNESS: At a rate of 125 ft

/gal: 5 mil dry, 12.5 mils wet

PAGE 1
TECHNICAL DATA DIGEST TITANIUM DRY PRODUCT DESCRIPTION TITANIUM DRY is a high performance alkali resistant water-proofing paint, with a revolutionary new technology of ultra small particle size hydrophobic latex designed to water-proof a wide variety of surfaces. Ultra White, ready mix paint tintable to pastel colors using HARRIS designer Colors. For exterior/interior (above or below grade use).
PAGE 2
PIGMENT (by weight): 43% ± 1% WEIGHT/GALLON: 11.88 ± 0.5 TYPE OF EMULSION: Acrylic Polymer THINNING: Not Recommended VISCOSITY: 105-110 KU’S COVERAGE: Rough Surface: First Coat 75 ft2 /gal. - Second Coat 125 ft2 /gal. Smooth Surface: First Coat 100 ft2 /gal - Second Coat 125 ft2 /gal. APPLICATION Stir thoroughly before and during application. Paint always on shaded side of building. Do not dilute TITANIUM DRY, use as supplied.