Operation Manual

ManualsBrandsHarman Kardon ManualsAudioFL8385

8 REAR-PANEL CONNECTIONS

REAR-PANEL CONNECTIONSREAR-PANEL CONNECTIONS

8 REAR-PANEL CONNECTIONS

™

∞

¡ AC Power Cord

™ Coaxial Digital Output

£ Remote Control Output

¢ Remote Control Input

∞ Analog Audio Outputs

¡ AC Power Cord: Connect this plug to an AC outlet.

If the outlet is switch-controlled, make certain that the

switch is in the ON position.

™ Coaxial Digital Output: Connect this jack to the

coaxial-digital input of a digital audio/video receiver or an

external digital-to-analog converter for direct access to

the digital signals of the FL 8385. DO NOT connect this

jack to the standard audio inputs of any device.

£ Remote Control Output: Connect this jack to the

input of another compatible Harman Kardon remote

controlled device to have the remote sensor on the

FL 8385 provide signals to other products.

¢ Remote Control Input: Connect the output of a

remote infrared sensor or the remote control output of

another compatible Harman Kardon product.This will

enable the remote control system to operate even

when the front panel

Remote Sensor $ is blocked.

It will also allow use of the FL 8385 with optional,

external control systems.

∞ Analog Audio Outputs: Connect these jacks to

the analog CD audio inputs of your receiver, surround

processor or preamplifier.

NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at