Operation Manual

16
BDS Setting Up the Receiver
Press the OK button and the TV-resolution screen will appear.
Initial Setup
Please select the highest resolution that your TV
supports. If you are unsure select ‘Auto’.
Auto
1080p
1080i
720p
480p/576p
Step 3/6
Next
Previous
OK
After selecting your TV’s highest resolution, press the OK button, and the TV aspect-ratio
screen will appear. Note: If you are unsure of your display’s highest resolution, select
“Auto” and the BDS receiver will select the optimal resolution for you.
Initial Setup
Please select the aspect ratio that fits your TV.
16:9 Full
16:9 Normal
4:3 Pan & Scan
4:3 Letterbox
Step 4/6
Next
Previous
OK
After selecting the aspect ratio that best fits your TV, press the OK button and the Initial
Setup speaker package screen will appear.
Initial Setup
Select the speaker package
you are using with BDS.
This will enable processing
in the BDS that maximizes the
sound performance of your system.
HKTS 9
HKTS 16
HKTS 30
HKTS 60
Other
Step 5/6
Next
Previous
OK
This setting enables processing in the BDS receiver that will maximize your system’s
audio performance. If you are using a Harman Kardon speaker package with your BDS
receiver, select its model number from the list. If you’re not using a Harman Kardon
speaker package, select “Other.”
Press the OK button to save your settings and then press it again to exit the Initial Setup
screens.
Settings Menu
Press the “Home” button on the remote control to select the Home Menu. From here you
can choose a number of audio and video sources, and access the Settings menu that lets
you set up the receiver’s various functions. To access the Settings menu, scroll down
through the Home Menu’s various options using the Cursor Down button until you reach
the Settings menu.
System
Language
Playback
Parental Control
Bluetooth
Network
Set your preferences for BDS and other general settings
General Settings
Use the remote’s Cursor Left/Right buttons to move from one menu to another, use the
Cursor Up/Down buttons to navigate through the lists that appear on the various screens,
and use the OK button to select highlighted items. Press the Back button at any time to
return to the previous screen.
General Settings
System
Language
Playback
Parental Control
Wireless Audio
Network
Front Panel Brightness
Screen Saver
Auto Standby
Standby Mode
One To uch Play
System Standby
100%
On
On
Standby
On
On
Set your preferences for how BDS operates
General Settings
System: The System option allows you to set the following system features:
Front Panel Brightness: This option sets the brightness of the BDS receiver’s information
Display, from Off/Auto Dim to 100%.
Screen Saver: When this option is set to “On”, the OSD screen saver will automatically
activate after five minutes of no activity.
Auto Standby: Depending on the Standby Mode setting (see below), when this option is
set to “On”, the BDS receiver will automatically enter the Standby mode or the Sleep
mode after 15 minutes of inactivity (no audio signal or user control input). If this option
is set to “Off” the BDS receiver will remain on until you manually put it into either the
Standby mode or the Sleep mode. See Volume Control, Power Button, On/Standby
indicator, on page 5, for more information about the Standby and Sleep modes.
Standby Mode: This option determines if the BDS receiver automatically enters the Sleep
Mode or the Standby Mode after 15 minutes of inactivity.
If Auto Standby is set to “On” and Standby Mode is set to “Sleep, BDS 275 and BDS
575 receivers will enter the Sleep mode after 15 minutes of inactivity, and will then
enter the Standby mode after being in the Sleep mode for 15 minutes.
If Auto Standby is set to “On” and Standby Mode is set to “Sleep, BDS 277 and BDS
577 receivers will enter the Sleep mode after 15 minutes of inactivity, and will then
enter the Standby mode after being in the Sleep mode for 30 minutes.
If Auto Standby is set to “On” and Standby Mode is set to “Standby,” the receiver will
enter the Standby mode after 15 minutes of inactivity.