Operation Manual

Technical Specifications
20
AVR40 rev (j) 4/16/97
Stereo Mode
Continuous Average Power (FTC)
65 Watts from 20Hz-20kHz: @<0.09% THD
both channels
driven into 8 ohms
Five Channel Surround Mode
Continuous average power per channel (FTC)
Front L&R channels:
55 Watts from 20Hz-20kHz @<0.3% THD
both channels
driven into 8 ohms
Center channel:
55 Watts at 1kHz @<0.3% THD
driven into 8 ohms
Rear channels:
2x25 Watts at 1kHz: @<0.7% THD
both channels
driven into 4 ohms
Amplifier Section
High-Instantaneous Current Capability
(HCC): ±35Amps
Negative Feedback: 21dB
Slew Rate: 60Volts/µSec
Frequency Response
@1W (+0/-3dB): 0.5-150Hz-kHz
Rise Time: 3.0µSec
Transient Intermodulation
Distortion (TIM): Unmeasurable
Preamplifier Section
Signal-to-Noise Ratio (ref. 1 Volt, A-Wtd)
Video, CD: 95dB
Input Sensitivity/Impedance
Video, CD, Tape: 200mV/32kΩ
Tone Control Range
Bass @ 50Hz: ±10dB
Treble @ 10kHz: ±10dB
Tuner Section: FM
Usable Sensitivity, Mono (dBf): 11.2µV/75Ω
50dB Quieting Sensitivity,
Stereo (dbf): 41dBf/75Ω
Signal-to-Noise Ratio (IHF-A)
@ 65dBf, mono/stereo: 79dB/73dB
Capture Ratio: 1.5dB
Selectivity, Adjacent/Alternate
Channel: 5dB/65dB
IF Rejection: 110dB
AM Rejection @ 45dBf: 55dB
Stereo Separation
@ 1kHz, 65dBf: 42dB
THD @ 1kHz, 65dBf,
mono/stereo (%): 0.2/0.04
Tuner Section: AM
Sensitivity, External Antenna: 500µV/m
Alternate Channel Selectivity: 55dB
Image Rejection: 30dB
IF Rejection: 55dB
General
Dimensions (WxHxD):
inches: 17-5/16 x 6-3/16 x 15
mm: 440 x 157 x 425
Weight (lbs/kgs): 27 lbs/12.3 kg
Power Requirement: AC 120V-60Hz
Power Consumption: 2Amps
Depth measurement includes knobs, buttons and antennas.
All features and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories Licensing Corporation.
Additionally licensed under one or more of the following patents:
U.S. numbers 3,632,886, 3,746,792 and 3,959,590;
Canadian numbers 1,004,603 and 1,037,877.
*Trademarks of Dolby Laboratories.
•AVR40 om (j).qx 9/15/98 3:47 PM Page 20