User's Manual

69
XM Satellite Radio mode
Status screens and messages
Status screen
Channel Not Authorized
If you try to tune from the presets to a
channel which is no longer subscribed, the
status screen
 shown below appears.
Additionally, the upper status line shows
the status message
.
 Status message Channel Not
Authorized
 Status screen
 To close the status screen: Press the
controller
.
The status screen and status message
disappears and the system tunes to the
channel heard before.
If the currently tuned channel becomes
unsubscribed, the same status screen and
the same status message as described
above appears.
 To close the status screen: Press the
controller
.
The status screen and status message
disappears and the system tunes to the
channel 1.
Status screen No Signal
If the received signal is not strong enough,
the status screen  shown below appears.
Additionally, the upper status line shows
the status message
.
 Status message No Signal
 Status screen
 To close the status screen: Press the
controller
.
The status screen
 disappears, but
the status message  will be displayed
as long as the received signal is not
strong enough.
In this case, operation of the system is
possible, but the status screen
 appears
again, as soon as you try to tune to another
channel.
If the received signal is strong enough
again, the status message
 disappears
and the system tunes automatically to your
last tuned channel.
Status screen Loading
If the tuner acquires audio or information/
decoding data, the status screen  shown
below appears. Additionally, the upper
status line shows the status message
.
While listening to XM
®
Satellite Radio, the
status message
 may appear depending
on the signal state.