User's Manual

259
Navigation
Settings
Function Display Miles/Display Km
You can use this function to switch the
measuring unit of distance values from
miles to kilometers or vice versa.
 Open the Map Display settings menu,
see “Opening the Map Display settings
menu” on page 258.
 In the Map Display settings menu,
select the menu item
Display Miles or
Display Km.
The measuring unit is switched and the
text of the menu item and the icon to the
left of it change accordingly, both
always show the current status.
 Icon = Measuring unit is set to
miles.
 Icon = Measuring unit is set to
kilometers.
Function Time To Destination
You can use this function to set the average
vehicle speed used by the system as a basis
for calculating the remaining journey time to
destination. You can make separate
settings for three different road types.
 Open the Map Display settings menu,
see “Opening the Map Display settings
menu” on page 258.
 In the Map Display settings menu,
select the menu item
Time To
Destination
.
The corresponding menu appears.
 Road type
 Indicator
 Currently set speed
 To select a road type: Push
 the
controller
 repeatedly until the
desired road type is highlighted.
 To set the speed: Turn
 the
controller
 until the desired setting is
reached.
The system saves this setting
automatically.
 To close the menu: Push
 the
controller
.
All other functions
 Open the Map Display settings menu,
see “Opening the Map Display settings
menu” on page 258.
 To activate/deactivate the function:
Select the corresponding menu item.
Depending on the previous status, the
function will be activated or deactivated.
The status display to the left of the
menu item changes accordingly.
 Display
 = function activated
 Display
 = function deactivated
The functions are listed below.