User's Manual

123
AUX mode
Signal sources
Connecting signal sources
General information
 If you connect an iPod
®
mobile digital
device, you cannot connect any other
signal sources.
 If you connect a USB memory stick and/
or AUX signal source, you cannot
connect an iPod
®
mobile digital device.
Connecting sockets
A USB socket (labeled with “USB”) and a
3.5 mm (0.14") jack socket (labeled with
“AUX”) are provided for connecting signal
sources.
 3,5 mm (0.14") jack socket
 USB socket
Connecting an iPod
®
mobile digital device
uses both sockets at the same time.
Notes on connecting an USB memory
stick
The system supports USB memory sticks
containing audio files. Any other USB
devices or anything else than music
playback is not supported.
Please pay attention to the following when
connecting an USB memory stick.
WARNING
If you connect and disconnect signal
sources when driving, you may be
distracted from the traffic situation, thus
increasing the accident hazard.
Only connect and disconnect signal sources
when the vehicle is stationary.
CAUTION
Please be careful that the USB socket is not
touched physically by any object. The
system may be damaged.
CAUTION
Any other USB devices such as hard discs
or other digital equipment may damage the
system as a result of excessive power
consumption.
When connecting and disconnecting a USB
memory stick many times in a short time, the
system may be damaged.
(continued)