User's Manual

CAR 135
Extended memory
In the PCM menu you have the option to store var-
ious settings for up to three of your vehicle’s igni-
tion keys and two of your vehicle’s memory but-
tons. Both driver-related settings from the instru-
ment cluster as well as PCM settings are stored in
this process.
The following PCM settings are stored:
– the personal data fields of the trip data in the
w main menu,
– the stations stored on the station buttons of
the various preset memories in radio mode,
– the sound settings for the various audio sourc-
es,
– the volume settings for the various audio
sources,
– settings for the map view as well as
– the settings for voice control.
The vehicle-dependent settings are described in
the following sections.
To find out more about the extended memory,
please refer also to the corresponding chapter in
the owner’s manual.
 The range of vehicle settings available in the
PCM depends on the vehicle type and the
equipment installed.
Setting light options
Setting the daytime running lights
If the “
Daytime Run. Lights” function is active ( ),
the lights will always be switched on when the en-
gine is running. This applies regardless of the light
switch setting.
The illumination of the instruments and switches is
still switched on and off via the light switch, re-
gardless of the “
Daytime Run. Lights” setting.
This function is only available in countries where
daytime running lights are not mandatory.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select “
SET CAR”
>“
Vehicle functions”
>“
Light & visibility”
>“
Exterior lights”.
4. Select “
Daytime Run. Lights” to activate ( ) or
deactivate ( ) the function.
Setting the fade-out time for the exterior
lights of the vehicle
You can set a fade-out time of between 10 and
120 seconds for your vehicle’s exterior lights.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select “
SET CAR”
>“
Vehicle functions”
>“
Light & visibility”
>“
Exterior lights”
>“
Fade-out time”.
4. Set the time period you want by touching the
two symbols and or by turning the right
rotary knob
t.
The setting is immediately applied.
The “
Fade-out time” setting also changes the illu-
mination duration when unlocking the vehicle.
To find out more about this, please refer to the
chapter “Welcome home function” in the owner’s
manual.