Specification Sheet

THIRD ANGLE PROJECTION

21-9/16

21-7/8

FINISHED GOODS TABLE/

ENGINEERING NUMBER

HR ITEM NUMBER

PRODUCT DESCRIPTION/

00-01700194-05 DBPO2-5SC DRAWER BASE PULLOUT ORGANIZER SYSTEM,

DBPO, WIDTH 5

00-01700194-08 DBPO2-8SC DRAWER BASE PULLOUT ORGANIZER SYSTEM,

DBPO, WIDTH 8

USE 58-300 SERIES

RUNNER MECHANISM

"NO WIGGLE"

TOP SUPPORT MECHANISM

PATENTED

6-WAY DOOR MOUNTING

ADJUSTABLE SYSTEM

(SEE "6WAY-ADJ_CSD" FOR

ADJUSTMENT DETAILS)

PATENTED

R.LAIRD 19SEP17 A3 0.150 1 / 3

APPROVED BY DATE SIZE SCALE SHEET

J. LAI 06SEPT17 DBPO_CSD

A. BROWN 15SEP17

DBPO, CUSTOMER SALES DRAWINGDRAWN BY DATE

BIRCH PLYWOOD CLEAR UV

DESCRIPTION

MATERIAL FINISH

DOCUMENT STATUS Released

HARDWARE RESOURCES RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.

IN CASE OF A DISCREPENCY, ACTUAL PART GEOMETRY SUPERSEDES THIS DOCUMENT.

THE INFORMATION CONTAINED WITHIN THIS DRAWING IS THE SOLE PROPERTY OF HARDWARE RESOURCES INC. ANY

REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN PERMISSION OF HARDWARE RESOURCES INC. IS PROHIBITED.

PAGE 1
"NO WIGGLE" TOP SUPPORT MECHANISM PATENTED 21-9/16 USE 58-300 SERIES RUNNER MECHANISM 20 6-WAY DOOR MOUNTING ADJUSTABLE SYSTEM (SEE "6WAY-ADJ_CSD" FOR ADJUSTMENT DETAILS) PATENTED 21-7/8 ENGINEERING NUMBER FINISHED GOODS TABLE/ HR ITEM NUMBER PRODUCT DESCRIPTION/ 00-01700194-05 DBPO2-5SC 00-01700194-08 DBPO2-8SC DRAWER BASE PULLOUT ORGANIZER SYSTEM, DBPO, WIDTH 5 DRAWER BASE PULLOUT ORGANIZER SYSTEM, DBPO, WIDTH 8 THIRD ANGLE PROJECTION DOCUMENT STATUS HARDWARE RESOURCES RESERVES THE RIGHT TO C
PAGE 2
5 8 5-7/16 8-7/16 DBPO-5SC DBPO-8SC DRAWING NUMBER DBPO_CSD SIZE SCALE A3 0.
PAGE 3
4 WAY ADJUSTABLE PLASTIC SYNCHRO CLIP PLASTIC NARROW CLIP SHOWN DETAILS ON THE UNDERMOUNT SLIDE CLIP DRAWING NUMBER DBPO_CSD SIZE SCALE A3 0.
PAGE 4
HORIZONTAL ADJUSTMENT 13/16 ADJUSTMENT RANGE 13/16 ADJUSTMENT RANGE TILT ADJUSTMENT VERTICAL ADJUSTMENT 1.00 RECOMENDED INITIAL POSITION FOR MAXIMUM ADJUSTMENT 3/16 EDGE OF WOOD INITIAL POSITION IS FLUSH WITH WOOD SURFACE 3/16 3/16 MAXIMUM TILT ADJUSTMENT 3/16 7/16 1-5/16 2-1/8 THIRD ANGLE PROJECTION MATERIAL N/A DOCUMENT STATUS HARDWARE RESOURCES RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. IN CASE OF A DISCREPENCY, ACTUAL PART GEOMETRY SUPERSEDES THIS DOCUMENT.