ITEM #0807421, 0807422 MAZON CEILING FAN MODEL #00724, 00725 UL #44-MZ Español p. 15 Harbor Breeze ® is a registered trademark of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
TABLE OF CONTENTS WARNING Safety Information............................................................................................................... 2 Package Contents............................................................................................................... 4 Hardware Contents...............................................................................................................5 Preparation ................................................................................
PACKAGE CONTENTS HARDWARE CONTENTS (shown actual size) J A AA BB Wire Connector Qty. 3 + 1 extra Blade Screw Qty.
ASSEMBLY INSTRUCTIONS 4. Connect the BLACK wire from the fan to the BLACK wire from the ceiling. Connect the WHITE wire from the fan, to the WHITE wire from the ceiling. Connect all GROUND (GREEN) wires from the fan together to the GREEN/BARE wire from ceiling. Connecting the GREEN/GROUND wires is conducive to receive the signal of the remote control. 1 Outlet box A Screw 2. Place trim ring (C) over canopy, and lay it on fan motor (B).
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 7. Align the notches on the fan motor (B) canopy with raised areas inside the trim ring (C). Pop the trim ring (C) into the canopy. 10. Connect the 9-pin plug exiting the bottom of the fan motor (B) to the 9-pin plug from the light plate (E). Be sure plugs snap together completely. Attach light plate (E) to switch housing plate (H). Align keyholes, then twist to lock. Replace previously removed screw (Step 9, page 8) and securely tighten all screws.
ASSEMBLY INSTRUCTIONS 13. Align the three flat areas on the top flange of the glass (G) with the three raised dimples in the light fixture (F). Insert the glass (G) into the light fixture (F), then turn the glass (G) clockwise until it stops. CAUTION: Avoid touching the LED with your bare hands. Be sure the power is off and the glass and LED are cool before cleaning the fixture. 13 Raised dimples F Flat area G 14.
CARE AND MAINTENANCE TROUBLESHOOTING IMPORTANT: Shut the main power supply off before beginning any maintenance. PROBLEM Fan blades do not move. POSSIBLE CAUSE 1. The power is off or the fuse is blown. CORRECTIVE ACTION 1. Turn the power on or check fuse. 2. Turn power off. Loosen motor housing; check all the connections. Noisy operation. 1. Blades are loose. 2. Cracked blade. 1. Tighten all blade screws. 2. Replace blades (call customer service). Excessive wobbling. 1. The blades are loose. 2.
WARRANTY The manufacturer warrants this fan to be free from defects in workmanship and material present at time of shipment from the factory for lifetime limited from the date of purchase. This warranty applies only to the original purchaser. The manufacturer agrees to correct such defect at no charge or at our option replace the ceiling fan with a comparable or superior model. To obtain warranty service, present a copy of your sales receipt as proof of purchase.
ARTÍCULO #0807421, 0807422 VENTILADOR DE TECHO MAZON MODELO #00724, 00725 UL #44-MZ Harbor Breeze® es una marca registrada de LF, LLC. Todos los derechos reservados. ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-800-643-0067, de lunes a jueves, de 8 a. m. a 6 p. m., hora estándar del Este, y los viernes de 8 a. m. a 5 p. m., hora estándar del Este.
ÍNDICE ADVERTENCIA Información de seguridad ......................................................................................................16 Contenido del paquete ..........................................................................................................18 Aditamentos ..........................................................................................................................19 Preparación .................................................................................
CONTENIDO DEL PAQUETE ADITAMENTOS (se muestran en tamaño real) J A AA BB Conector de cables Cant. 3 + 1 adicional Tornillo para aspas Cant.
INSTRUCCIONES DE ENSAMBLAJE 1 Caja de salida Nota: el cable NEGRO es el que proporciona alimentación al ventilador y al kit de iluminación. El cable BLANCO es el mismo para el ventilador y para el kit de iluminación. El cable VERDE es el cable de puesta a tierra. Si los cables de la casa no tienen los colores que se mencionaron anteriormente, deténgase de inmediato y consulte con un electricista profesional para determinar el cableado correcto. A Tornillo 2.
INSTRUCCIONES DE ENSAMBLAJE INSTRUCCIONES DE ENSAMBLAJE 7. Alinee las muescas en la base del motor del ventilador (B) con las áreas elevadas en el interior del anillo de reborde (C). Instale el anillo de reborde (C) en la base. 7 Muesca C Base Área elevada B 10. Conecte el enchufe de 9 clavijas que sale de la parte inferior del motor del ventilador (B) al enchufe de 9 clavijas de la placa de iluminación (E). Asegúrese de que los enchufes encajen juntos completamente.
INSTRUCCIONES DE ENSAMBLAJE 13. Alinee las tres áreas planas de la brida superior del vidrio (G) con las tres protuberancias en la lámpara (F). Coloque el vidrio (G) en la lámpara (F) y gire el vidrio (G) en dirección de las manecillas del reloj hasta que se detenga. PRECAUCIÓN: evite tocar la bombilla LED con las manos descubiertas. Asegúrese de que la alimentación esté desconectada y de que el vidrio y la bombilla LED estén fríos antes de limpiar el ensamble. 14.
CUIDADO Y MANTENIMIENTO SOLUCIÓN DE PROBLEMAS IMPORTANTE: antes de realizar cualquier trabajo de mantenimiento, desconecte el suministro de electricidad principal. PROBLEMA CAUSA POSIBLE Las aspas del ventilador no se mueven. 1. No hay suministro de electricidad 1. Conecte la alimentación o revise o hay un fusible quemado. el fusible. 2. Desconecte la alimentación. Afloje la carcasa del motor y revise todas las conexiones. El funcionamiento es ruidoso. 1. Las aspas están flojas. 2.
GARANTÍA El fabricante garantiza que este ventilador no presenta defectos de fabricación ni en los materiales presentes en el momento del transporte desde la fábrica, durante un período limitado de por vida a partir de la fecha de compra. Esta garantía es válida solo para el comprador original. El fabricante acepta reparar dichos defectos sin cargo o, según nuestro criterio, reemplazar el ventilador de techo por un modelo comparable o superior.