User Manual
Table Of Contents
- overview
- One-way camera
- LED parking indicator light
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
English _25
! LED PARKING INDICATOR LIGHT
Assembling the parking indicator light module
1. Insert the parking indicator light module into the mount plate.
`
Align with the hinges as shown in the figure and then insert it.
[Installing the network cable]
2. Remove the cable busing from the parking indicator light module.
3. Remove the protruding part on the removed cable bushing.
4. Use the cap installer to route the network cable through the cable bushing.
Cap Installer