User's Manual

Move to 'AUTO SEARCH'
Move to 'TYPE'
2524
50
1
Adjust
Setup
Sound
CHANNEL
CHANNEL
ADD/DEL SELECT
FLNE TUNE
AUTO SERCH OFF
TYPE
Type
Auto Search
Use to select Cable/Air.
50
1
Adjust
Setup
Sound
CHANNEL
CHANNEL
ADD/DEL SELECT
FLNE TUNE
AUTO SERCH OFF
TYPE
Use to select 'ON' button and then press SELECT
button, and the channel is searched automatically and saved.
Hot Key
PC Mode
TV & Video Mode
1) Hot key on the monitor
Information Display
Press CH button on the monitor to display information
(resolution, frequency and others).
Auto Adjustment
Press AUTO/EXIT on the monitor front when OSD is not displayed to
perform Auto Adjustment.
2) Hot key on remote controller
Information Display
Press ENTER key on the remote controller to display information.
Zoom function in PC mode (controlled with remote controller only)
Press ZOOM button on the remote controller in PC mode to display
gauge in the lower center of the monitor.
Use
and to adjust ZOOM size.
Press ZOOM button again to adjust ZOOM location.
Press ZOOM button again to exit ZOOM OSD.
1) Hot Key on the monitor
Press CH button in TV mode when OSD is not displayed, so that channel
number can be changed.
Press VOL button in TV or Video mode when OSD is not displayed, so
that volume may increase or decrease.
AUTO/EXIT button.
2) Hot Key on remote controller
Displaying information on TV mode
Press ENTER key on remote controller to display information
(current channel information).
Displaying information on Video mode
Press ENTER key on remote controller to display information
(current video input information).
Refer to 'OSD function for PC' for 'Adjustment', 'Setup' and 'Sound' during TV and video
operation.
Move to 'CHANNEL'
Move to 'CHANNEL'