Metal Garden Cabinet OWNER'S MANUAL Instructions for Assembly 9820009 Size:L81 x W98 x H180cm Size:L31.9" x W38.6" x H70.8" Requires two people and takes 2 - 3 hours for lnstallation.
BEFORE YOU START Owner's Manual Prior to installation, it is important that you contact your local government authority to determine if building approval is required. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly instructions Instructions are supplied in this manual and contain all appropriate information for your building model. Review all instructions before you begin.
PLAN AHEAD Site Selection l Avoid overhanging trees as much as possible as leaves will make regular cleaning necessary and broken branches are a potential hazard. l Small trees,bushes or fences nearby can be helpful,acting as a wind break. Site Preparation The site must be prepared so that the base of the shed is level all round and checking with a spirit level is required. The base can be constructed by treated timber or concrete,in order to stop the moisture getting into the shed.
NO. 1 2 Qty. NO. 2 GJ 1700mm / 67" 4 1 K3 930mm 36.6" 6 / 1 K4 / 1 PART / 752mm 29.6" / 966mm 38" 3 966mm 38" 10 930mm 36.6" 17 19 888mm / 35" 3 1 1 L1 1 1 62 782mm / 30.8" 1 782mm / 30.8" 1 1 / 1 / 803mm 31.6" / D1 / 803mm 31.6" Qty. PART 15 1014mm 40" 4L 1700mm / 67" 4R 1700mm / 67" 1 63 811mm / 32" 1 B6 3 811mm / 32" 1 GB 1 / 1 GS 2 / 1 S2 60 / 1 S3 120 24 25 27 1014mm 40" 47 1014mm 40" W1 927mm 36.
GS 17 24 47 P5 GS 27 19 P5 15 25 K4 10 K3 P1 K4 P4 P1 P4 K1 K1 K3 K4 K3 P4 L1 P4 J1 1 4L 2 J1 J1 W1 3 1 62 GB K1 J1 K1 D1 63 B6 4R 5
NO. Qty. PART 1 Base Assembly 2 1 752mm 2 2 1 1394mm 3 1394mm 1 F1 NO. PART 3 1 Qty. J1 4 W1 1 W1 J1 J1 W1 J1 J1 J1 F1 Anchor Assembly Base Assembly Inspection 1、When diagonal measurements are equal,the frame is square. 10FT 2、The Floor Frame must be BOTH square AND level or the holes will not line up properly.
NO. Qty. PART P4 1 P4 5/16" 3 S3 F1 NO. Wall panels installation Qty. PART P1 P1 P1 2 S3 S3 F2 3 F1 NO. PART P4 Qty.
NO. Qty. PART P4 1 S3 P4 F2 5/16" S3 F1 S3 3 F1 NO. Qty. PART P4 1 S3 F2 S3 S3 F1 F1 P4 NO. PART Qty.
NO. Qty. PART 10 10 1 5/16" S3 F1 Rear Beam Installation NO. Qty. PART 15 15 1 S3 F1 F1 S3 F1 F1 Front Beam Installation NO. PART Qty.
NO. Qty. PART GJ 2 GJ GJ F1 F1 NO. Shelf Frame Installation F1 Qty. PART GJ GJ GJ 2 F1 L1 F1 F1 F1 NO. F1 Shelf Frame Installation PART Qty.
NO. Qty. PART P5 P5 P5 2 F2 S3 F1 S3 Roof Installation NO. Qty. PART 17 1 19 1 Roof Beam Installation 17 19 F1 S3 F2 S3 5/16" Qty. NO. 27 1 GS 47 1 NO. PART Qty.
Screwing Screwing 47 27 S3 S3 F1 NO. PART F1 Qty.
NO. PART Qty. 62 1 63 1 D1 1 Door Reinforcing Ribs Installation F1 62 63 D1 NO. PART B6 Qty.
NO. PART GB Qty.
IMPORTANT If you have any problems with this product, please DO NOT RETURN THIS ITEM To the Retailer/Store from where you purchased the product. Please email us anytime with the nature of the problem at: ContactUs@Hanover‐Products.com Please include: Pictures of the issue(s) and receipt (if available) Name and address of the Purchaser Name of retailer Or call our Customer Service team between 9:00 AM and 5:00 PM Eastern Time, Monday through Friday at: 1‐877‐397‐5144 or visit our website at: www.
Outdoor Products 1‐Year Limited Warranty Program For a period of one (1) year after purchase, Hanover (“Manufacturer”) will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase. Replacements under this warranty revert back to the date of original purchase for future warranty.
