Metal Cabinet OWNER'S MANUAL Instructions for Assembly 9820011 Size:L86 x W147 x H134cm Size: L2.8' x W4.8' x H4.4' Requires two people and takes 2 - 3 hours for lnstallation.
BEFORE YOU START Owner's Manual Prior to installation, it is important that you contact your local government authority to determine if building approval is required. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly instructions Instructions are supplied in this manual and contain all appropriate information for your building model. Review all instructions before you begin.
PLAN AHEAD Site Selection l Avoid overhanging trees as much as possible as leaves will make regular cleaning necessary and broken branches are a potential hazard. l Small trees,bushes or fences nearby can be helpful,acting as a wind break. Site Preparation The site must be prepared so that the base of the shed is level all round and checking with a spirit level is required. The base can be constructed by treated timber or concrete,in order to stop the moisture getting into the shed.
NO. PART Qty. NO. PART Qty. 1 752mm / 29.6" 1 P1 1300mm 51" 1 1-1 752mm / 29.6" 1 P2 1300mm 51" 1 2 1394mm / 54.8" 1 P3 1250mm 49.2" 1 3 1394mm / 54.8" 1 P4 1250mm 49.2" 1 9 724mm / 28.5" 2 P5 1195mm 47" 3 10 1354mm / 47.5" 1 P6 852mm 33.5" 3 17 1460mm / 57.5" 2 P7 1300mm 51" 2 15 852mm / 33.5" 2 J1 4 4L 1300mm / 51" 1 GC 4 4R 1300mm / 51" 1 G2 4 7 1354mm / 47.
GC 15 17 P6 GC P6 P6 17 GC 15 GC J2 9 10 J2 J1 P5 P4 P5 P2 1 P5 2 J1 3 J1 1 18 7 18 J1 6 9 D1 D1 P7 GB 4L 18 P3 P1 18 4R P7 5
NO. Qty. PART NO. Qty. PART 1 1 2 1 1-1 1 3 1 Base Assembly F1x 81 F1 1 2 3 NO. PART J1 F1 1-1 Qty. 4 F1x 16 1 Anchor Assembly J1 J1 J1 F1 Base Assembly Inspection 1、When diagonal measurements are equal,the frame is square. 2、The Floor Frame must be BOTH square AND level hor the holes will not line up properly.
NO. PART Qty. P3 1 P5 1 P3 P5 5/16" 3 S3 S3 F2 F1 NO. PART Left Front Corner Installation Qty. P4 1 P5 1 Right Front Corner Installation P5 P4 5/16" 3 S3 S3 F2 F1 NO. PART Qty.
NO. PART Qty. P1 1 P7 1 P1 Front Corner Panels Installation Corner Column Installation 5/16" S3 S3 P7 F2 F1 NO. PART 10 Qty. 10 1 S3 F1 Back Beam Installation NO. PART 9 Qty.
NO. PART Qty. 7 1 G2 4 6 1 Front Beam Installation Door Slider Installation 6 F1 S3 7 G2 NO. PART Qty. 6 2 J2 G2 G2 G2 Upper Corner Connecting Installation F1 J2 NO. PART 4L Qty.
NO. Qty. PART P5 5/16" 1 P5 Back Panel Installation S3 S3 F2 F1 NO. PART P6 F1 S3 Qty. P6 5/16" 3 P6 F2 S3 P6 Roof Panel Installation NO. PART 15 Roof Beam Installation Qty.
NO. Qty. PART 17 Eaves Fixation 2 17 17 NO. PART GC Qty.
NO. Qty. PART D1 1 GB 2 Door Handle Assembly GB F2 5/16" D1 x2 NO. PART 18 Qty. 4 Door Frame Assembly 5/16" F1 18 F2 S3 18 D1 S3 x2 F2 NO. PART Qty.
Door Fixation 7&8 G2 Assembly Completed Well done! F3 D1 D1 13
IMPORTANT If you have any problems with this product, please DO NOT RETURN THIS ITEM To the Retailer/Store from where you purchased the product. Please email us anytime with the nature of the problem at: ContactUs@Hanover‐Products.com Please include: Pictures of the issue(s) and receipt (if available) Name and address of the Purchaser Name of retailer Or call our Customer Service team between 9:00 AM and 5:00 PM Eastern Time, Monday through Friday at: 1‐877‐397‐5144 or visit our website at: www.
Outdoor Products 1‐Year Limited Warranty Program For a period of one (1) year after purchase, Hanover (“Manufacturer”) will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase. Replacements under this warranty revert back to the date of original purchase for future warranty.
Metal Garden Shed Foundation Kit Instructions for Assembly 9820011
NO. PART W3 1355mm / 53.3" F1 Qty. 1 20pcs F1 screws are our standard quantity for fundation. Only 2 pcs F1 screws are needed for this model. Metal Fundation Assembly Mounting the fundation via screw here. W3 Mounting the fundation via screw here.
