FOUNTAIN MANUAL ASSEMBLY & OPERATING INSTRUCTIONS Please read carefully and save these instructions.
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. The supplier will not be liable for any damages caused by failure to follow these instructions. Contents of box: • Fountain • Water Tube • Small Water Connection Tube • 1 x Water Pump/Transformer Combo Unit Installation The unit must be completely assembled & filled with water before switching on the power: • Place your water feature on a flat surface, free from any sharp objects.
CAUTION • • • • • • • • • • • • • • • • • • NEVER LET THE PUMP RUN DRY. Always unplug the pump from the electrical outlet before cleaning & handling Use with clean water only, do not place the fountain and/or parts in any other liquid. Periodically change water & clean the pump to keep it free from microorganisms Disconnect and store the unit in a dry place if not in use for an extended period of time or during freezing weather. Do not operate the fountain in temperatures below 41° F / 5° C.
MAINTENANCE • • • • • • • If debris is caught in the intake vents of the pump, disconnect from any power sources and rinse the pump under clean running water. Use this pump with distilled water only. Mineral build-up from tap water or other water sources can cause build-up in the pump. We recommend occasionally putting a sterilizing tablet into the water feature to prevent bacteria. You can find this at your local hardware store. Clean the water fountain regularly.
TROUBLESHOOTING What if the pump does not turn on? • Check that the pump is connected and switched on. • Check that there is an adequate amount of water in the reservoir. The water should always be about 15cm above the pump to ensure the necessary water flow. • Check that the pump has no debris inside. Why is my pump making a strange noise? • Disconnect the pump from the power supply. • Carefully grip the motor and pull the rotor out of the pump housing. Rinse the propeller with clean water.