User Manual

DELETE LOGGED DATA

• Select code 05 to delete the Log on Demand data or code 06 to

delete the Timed Log Data.

• A scrolling message will be displayed.

• Press ALT and CFM to confirm deletion.

• It is also possible to escape without data deletion pressing ALT

and FNC.

Note: The associated Sample IDs will be deleted, too.

GLP DATA

Cod. 10 - viewing GLP data

• Select the code 10

• A message will scroll twice across LCD.

• The LCD will then display the instrument identification (ID) code.

• Press

áá

á to scan remaining data, in the following order:

last calibration date (DD.MM)

last calibration year

Note: Data can be viewed in reverse order pressing the

ââ

â key.

• Press ALT and FNC to return to function selection mode.

Code 20 - setting the instrument identification (ID) code

When using several identical meters it may be useful to uniquely

identify them by assigning an ID code to each meter.

• Select code 20. A message will scroll across LCD.

• Enter a 4-digit value using the arrow keys.

• Press ALT and CFM to confirm the value.

TESTING BATTERY LEVEL

• Select code 41. The message "Battery test" will scroll across LCD.

• If the meter is connected to an external power adapter, the LCD will

display "LINE", otherwise it will display "bAtt" on the upper LCD,

and the remaining percentage of battery

charge (100% means fully charged bat-

tery and 0% corresponds to the minimum

battery voltage that allows the meter to

operate).