User Guide

11
10
HI 9060 and HI9061 stop to operate when the
low battery signal is detected. The user is
warned by the code
"Eb".
HI 91541 displays "BAT"
when the batteries are
run down.
See also the Battery
Replacement section on
page 14.
BAT
HOLD MODE (for HI 9060 only)
The reading hold function is activated by the
HOLD key. The measured temperature is
frozen on the display when this function key
is pressed.
A blinking "M" on the display indicates the
operating mode.
Press the same key again
to resume normal opera-
tion.
MEASURING SCALE (°C/°F) (for HI9060
only)
When the meter is
turned on it automatically
defaults to the °C scale.
Measurements can be performed in either
the Centigrade or Fahrenheit scale. To change
the scale, press the °C/°F key once.
LOW BATTERY DETECTION
HOLD
°C
M
HOLD
°C
°C/°F
°F