User's Manual

4. En
ter the device Name, User Name, Password, and click Add.
Note
●
Only when the doorphone is added t
o the client soware, you can remotely
congure the indoor staon.
●
Only online devices with the same user name and acvaon password can
support batch acvaon.
Aer the device is added, the device informaon will be listed in the device list
ar
ea.
10.2.2 Add Device via IP Address
Steps
1. In the de
vice list area, click Add to pop up the device adding dialog box.
2. Select the adding mode as IP/Domain Name.
3. Enter the corresponding informaon of the device: Name, Address, User Name,
and Password.
4. Click Add.
10.2.3 Add Device via IP segment
Steps
1. In the device list area, click Add to pop up the device adding dialog box.
2. Select adding method as IP segment, and enter the corresponding informaon:
Starng IP Address. Ending IP Address, Port No., User Name, and Password.
3. Click Add.
Aer adding, the device informaon will be displayed in the device list area.
10.2.4 Add Devices in Batch
Steps
1. In the device list area, click Add to pop up the device adding dialog box.
2. Select the adding mode as Import in Batch.
3. Click Export Template, and enter the device parameters to be imported according
to the template.
Video Intercom Face Recognion Door Staon User Manual
82