User's Manual

Safety
Instrucon
Warning
●
All the electr
onic operaon should be strictly compliance with the electrical safety
regulaons, re prevenon regulaons and other related regulaons in your local
region.
●
Please use the power adapter, which is provided by normal company. The power
consumpon cannot be less than the required value.
●
Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
●
If the product does not work properly, please contact your dealer or the nearest
service center. Never aempt to disassemble the device yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cauon
●
Do not dr
op the device or subject it to physical shock, and do not expose it to high
electromagnesm radiaon. Avoid the equipment installaon on vibraons
surface or places subject to shock (ignorance can cause equipment damage).
●
Do not place the device in extremely hot (refer to the specicaon of the device
or the detailed operang temperature), cold, dusty or damp locaons.
●
The device shall be kept from rain and moisture.
●
The device shall be kept from explosives.
●
Keep surfaces of the device clean and dry.
●
Avoid contact with exposed circuits. Do not touch the exposed contacts and
components when the product is powered on.
Cauon
●
K
eep the device away from children and out of reach.
●
CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
●
Improper replacement of the baery with an incorrect type may defeat a
safeguard (for example, in case of some lithium baery types).
●
Do not dispose of the baery into re or a hot oven, or mechanically crush or cut
the baery, which may result in an explosion.
Video Intercom Face Recognion Door Staon User Manual
iv