User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Local Operation
- 6 Remote Configuration via Web
- 7 Configuration via Client Software
- A. Communication Matrix and Device Command
Note
•
When the de
vice is not acvated, the basic operaon and remote operaon
of device cannot be performed.
•
Y
ou can hold the Ctrl or
Shi key to select mulple devices in the online
devices, and click the Acvate buon to acvate devices in batch.
4.3 Acvate Device via Web
You are required to acvate the device
rst by seng a strong password for it before
you can use the device.
Default parameters of the door staon are as follows:
•
Default IP Address: 192.0.0.65.
•
Default Port No.: 8000.
•
Default User Name: admin
Steps
1.
Power on the device, and connect the device to the network.
2.
Enter the IP address into the address bar of the web browser, and click Enter to
enter the acvaon page.
Note
The computer and the device should belong to the same subnet.
3.
Create and enter a password into the password eld.
4.
Conrm the password.
5.
Click OK t
o acvate the device.
Video Intercom D Series Door Staon User Manual
24