User's Manual

Figure 6-14 Linked Network Sengs
2. Set the master staon IP address and master staon SIP cllient Port.
3. Set the private SIP server IP address and private SIP Server Port.
4. Set the SIP Client Port.
5. Enter the password.
6. Click Save to enable the sengs.
Time Parameters
Click Intercom → Time Parameters to enter the page.
Congure the me parameters and click Save.
Note
Maximum speaking me varies from 90s to 120s, and maximum message me varies
from 30s to 60s.
6.4.8 Access Control Sengs
Video Intercom D Series Door Staon User Manual
49