User's Manual

80mm 80mm
正面
72mm
80mm 80mm 80mm
400mm
72mm
You can tap “ ” to edit the name of
devices and assign rooms before
adding them.
Try to tap “ ” to identify which one
you are editing if you are trying add
multiple devices at the same time.
Tap “Done” to finish the setup.
What’s Required
A smart phone or tablet running
iOS 11.0 / Android 5.1 or higher
with Bluetooth turned on.
NOTE: For remote control from
external networks or
Alexa/Google voice control, a
BLE gateway/hub is required to
be set up to router with Internet
access.
• You can add multiple devices
at same time.
Tap “Add Device” > “Light” > “Add
Devices”.
Power up devices (if they are
already powered up, switch them
o and on just once to enable
pairing mode) and wait them to
be discovered in the App.
•
•
Install APP
STEP 1
•
•
•
Complete Adding
STEP 3
Scan the QR code or search
“BroadLink BLE” in App Store or
Google Play to download and
install the free App.
Account creation is not mandatory
to use the App. However, as an
option, you can go to “Me” tab to
create your account for syncing
data between dierent mobile
devices.
•
•
Add Device
STEP 2
Now you can tap “ON” or “OFF”
button in device list for quick
control or enter device page for
detailed control of color, color
temp, brightness and eects.
Tap “Detail” to rename the device
or re-assign a room. To manage
multiple devices in rooms, tap “ ”
at the end of room names or go to
“Me” > “Room management”.
•
•
STEP 4
Use & Manage
Devices
•
•
Edit Scenes
STEP 7
Control Groups
STEP 5
Control Preset
Scenes
STEP 6
Most of time you can just
activate a scene and do some
small tune-ups on devices as
you wish. Then tap the “ ” to
enter scene detail and tap “Save
current status” to override the
default scene.
You can also add/delete devices
or set device status on scene
detail page.
You can tap “Batch Control” for
temporary grouped control or
“Room Control” for controlling all
lights in the room.
For fixed group control, please
use “+” > “Create Group”.
•
•
The App and devices are
designed with preset scenes in
each room for out-of-box use.
Just switch to “Scene” tab and
choose a room to activate scenes.
•
•
Color Lamp
Product FeaturesSpecifications
Model LB4E26 LB4E27
Φ60x107 Φ60x110
AC 110-130V
50/60Hz
AC 220-240V
50/60Hz
800lm
Wirelessly Dimmable
2700K-6500K
RGB Full Colors
Dimensions
Rated Voltage
Rated Power
Luminous Flux
Dimming
Color Temp
Multi-Color
Color Lamp<
Done
Just Once
Pairing in 10s
Pattern Detail
Add Devices
< Add Device< Add Device
Loading progress: 2/2
Save current status
+ Add Implemented Device
Color Temp 4600
Commonly used
User Manual
Smart Bulb丨LB4E26/LB4E27
Having issues of using the product?
Please contact us before returning.
We are always be ready to help until you smile :)
Access product tutorials and manuals from
[e-mail]
021089_20
Ocial Website Facebook YouTube
Twitter
No Account
Required
Auto Power-Up
Pairing
Batch Device
Pairing
Mesh Network
Coverage
Preset Scenes Easy Automation
Change
Auto Room
Groups
Music Sync
9W
FCC Radiation Exposure Statement
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’ s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF exposure guidelines, the distance must be at
least 20cm between the radiator and your body, and fully supported by the operating
and installation configurations of the transmitter and its antenna(s).
Important Notices
•
•
•
A compatible BLE gateway/hub is required if you want to enable
remote control (outside home), voice control and timer function
to devices.
The devices support mesh networking up to 255 devices to extend
signal range and sync actions. The more device you add, the more
stable the network will be.
The use of App doesn't require creation of account for simplest
experience. We still highly recommend users to create account so
when you change a phone and log in with same account, everything
will be automatically synced without setting up again.
•
•
•
Color Lamp
Light Batch control
All control
Color Lamp
ON OFF
Light
Panel
Curtain
Sensor
Gateway
< Scene Detail
All
Living room Master bedroom
My home
Back Home All OFF
Bright Movie
ONOFF
All
Living room Master bedroom
My home
ON OFF
Color Lamp ON OFF
Device Scene Music Mic Mine Device Scene Music Mic Mine
•
•
Music Sync
STEP 8
You can switch to “Music” tab
and select music from default list
or phone (only support Android)
to play. The lights will change
eects according to the music.
You can also switch to “Mic” to
let the App sense the rhythm of
sound in your environment and
change the eects.
Classical
All
Device Scene Music Mic Mine
Add Device
Add Scene
Scan QR code
Create Group
Scene Name
Room
Style
Implemented Device
Custom Implemented Device
Custom Scene
All
>
二维码链接：https://www.ibroadlink.com/bleapp
80*72
成品尺寸
查杰
钱敏
2022.4
品牌工艺说明
原始版本
物料编号
产品经理
业务审核
确认时间
物料编号
设计编码
物料名称
1.0
黄绯菲
2022.1
1.1
1.2
80g双胶纸
设计
LB4E系列灯泡-BLE-说明书-BL-EN-V1.1-2204
LB4E.BLE.SMS5ZY.BL.EN.1.1
风琴5折页
材质
印刷色
加工工艺
/
APP下载二维码修改黄绯菲
2022.4
/
替代物料编码
四色