User Manual

Section 4: Installing the Vertical Stabilizer

Required Parts

• Fuselage assembly • Fin

• Tail wheel wire • Steering control arm

• Tail wheel wire support bracket

Required Tools and Adhesives

• 30-minute epoxy • 6-minute epoxy

• Square • Hobby knife

• Pliers • Ruler

Step 1

Remove the covering from the top of the fuselage for

the vertical fin and from the bottom of the fuselage

for the tail wheel wire.

Step 2

Locate the tail wheel wire. Slide the steering control

arm onto the wire as shown.

Step 3

Test fit the fin to the fuselage. Slide the fin as far

forward in the slot as possible to provide clearance

for the tail wheel wire. Trace the outline of the

fuselage onto the fin using a felt-tipped pen.