User guide

60
Extreme 3D Setup
How can an already excellent setup be improved? What factors are involved?
1. Weight/wing loading
2. Speed and torque of the servos
3. Deflection of surfaces
4. Power/weight ratio
The Setup covered in the manual will result in excellent performance but for those modelers
who like to go to the limits, we've included some tips below.
1. Eliminate regulators by using JR 8911HV servos and 8917HV for throttle. The speed and
torque of JR 8911HV servos are superior to the JR 8711. At the same time the 8911HV offers
new SuperSteel
™
gears to take the extra abuse.
2. Get 50 to 55 degrees of elevator deflection by replacing the 2.5-inch titanium pro-link
included in the kit with the 3-inch Hangar 9 pro-link (HAN3553). The extra 10 degrees in
deflection would allow even tighter pitch maneuvering.
Performing the tips above reduces wing loading, increases power to weight ratio and agility.