User guide

48
 Step 2
The tray is now ready to be secured to the
fuselage frame. Scratch up the surface that
will sit on the fuselage rail with a hobby knife.
Mix some 30-minute epoxy and brush it up on
the tray. Apply a small amount to the fuselage
frame and place the tray in the fuselage. Add
some weight until the epoxy cures.
Note: In the picture above a
crescent wrench that has some
weight has been placed on top of
the batteries with two small clamps.
Make sure you do not move the
fuselage, which can drop the
weight and damage the fuselage.