User's Manual

In Wall Access Point

• IEEE802.11g Wireless LAN

• IEEE802.11n Wireless LAN

• Static IP WAN Client

• DHCP WAN Client

Security and Firewall

• WEP

• WPA

• WPA2

• WPS

Management

• Web-based Management Tool

• Firmware Upgrade via HTTP/TFTP

• Backup/Restore/Factory Default Setting

• Remote Authorized Management

• SNMP v1/v2 (MIB II, Private MIB)

• System Information Table

2 Installation

The followings are instructions for setting up the In Wall Access Point. Refer to the illustration and

follow the simple steps below to quickly install your In Wall Access Point.

Step 1：Slide the Bracket to align with screw holes on the WAP-001, and fasten the Bracket tightly with

screws on the WAP-001.