Use and Care Manual

Stop the Slip

Grit Tape Application Instructions

Issue Date: 1/1/2016

1. Do not apply Grit Tape when surface temperature is below 50 degrees Fahrenheit.

2. Fill in cracks, seal porous surfaces and repair to a smooth finish, as required. Avoid

application to grout areas.

3. Always apply Grit Tape to clean, dry, wax and oil-free surface. Allow ample time for

drying.

4. Peel off protective release paper from Grit Tape.

5. Press Grit Tape to prepared surface. Bond is increased by using a rubber hand roller.

6. Grit Tape is ready for immediate use, no need to wait.

7. Keep Grit Tape clean. Use mild floor cleaners as directed.

8. Application to porous surfaces is not recommended.

9. Can be cut to size.

PAGE 1
Stop the Slip Grit Tape Application Instructions Issue Date: 1/1/2016 1. Do not apply Grit Tape when surface temperature is below 50 degrees Fahrenheit. 2. Fill in cracks, seal porous surfaces and repair to a smooth finish, as required. Avoid application to grout areas. 3. Always apply Grit Tape to clean, dry, wax and oil-free surface. Allow ample time for drying. 4. Peel off protective release paper from Grit Tape. 5. Press Grit Tape to prepared surface. Bond is increased by using a rubber hand roller.