™ INSTALLATION MANUAL Natural Concrete Products | 3607 East Hwy 24 | Norfolk, NE | 888.379.2210 | info@NaturalConcreteProducts.
GETTING STARTED WITH HANDI PIER™ HANDI PIER™ is an EASIER way to install structural support foundation systems. Stop digging holes and waiting for concrete to dry. The HANDI PIER™ system saves you time & money on the job-site. HANDI PIER™ has been engineered using high-strength concrete with a steel reinforced rod core for extra durability and longevity and is designed to be used with a 4" or 6" post bracket or connector.
LOAD CHART & ESR The following load chart is intended for residential use only on decking and foundation projects such as decking, covered walkways, gazebos, platforms, columns and post supports for simple structures. Please follow all load chart requirements before using HANDI PIER™ support block systems on your desired project. The information provided is in comparison to standard poured concrete footings including load bearing capacity and frost heave resistance.
SOIL CONDITIONS HANDI PIER™ support block has been engineered to withstand normal soil conditions throughout the region. When using HANDI PIER™ support block on a residential project, it is important to know that it cannot be installed with soil conditions less than 2000 psf sands/gravel and 1500 psf silt/clay. HANDI PIER™ is designed to be installed in normal soil conditions. Soils that do not meet these requirements can result in failure of the structure and void all warranties.
QUICK INSTALL GUIDE YOU WILL ALSO NEED FOR INSTALL: YOUR HANDI PIER™ KIT INCLUDES: HANDI PIER™ CONCRETE HEAD (1) GALVANIZED STEEL RODS (4) ROD DRIVER PLUGS (4) ROD CAPS (4) INSTALLATION INSTURCTIONS WARRANTY INFORMATION 1-1/8" HEX DRIVING BIT & BREAKER HAMMER SAFETY GLASSES, GLOVES & EAR PROTECTION SHOVEL, LEVEL & TAPE MEASURE SLEDGEHAMMER OR MAUL SILICONE CAULK AND CAULKING GUN TWO OR MORE PEOPLE TO ASSIST IN INSTALL STEP 1: Identify the location of each HANDI PIER™ needed for the project.
TROUBLESHOOTING DAMAGED HANDI PIER™ HEAD Before installing your HANDI PIER™, it is always best to inspect the head for cracks, faults or defects. Keep in mind that minor chipping, flaking, pitting and/or color variation is common and will not affect the installation. The HANDI PIER™ support system is reinforced with a steel core to keep the rods in position and to help protect the head from structural damage during installation and load bearing pressures.
OBSTRUCTIONS & REMOVING HANDI PIER™ OBSTRUCTIONS Call before you DIG by checking with your local utility companies! Before installing HANDI PIER™ support block system, confirm that there are no underground utilities, wires, cables, etc. in the area where the HANDI PIER™(s) will be located keeping in mind the width of the installed HANDI PIER™ is approximately a 3' radius or a total of 6' diameter. If at anytime you come upon an obstruction while driving a pin, stop immediately to assess the obstruction.
WARRANTY INFORMATION LIMITED WARRANTY ON HANDI PIER™ THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THE LIMITED WARRANTY CAN BE FOUND ONLINE AT WWW.NATURALCONCRETEPRODUCTS.COM/HANDI-PIER AND IN THE DOCUMENTATION WE PROVIDE WITH THE PRODUCT. PRODUCT MUST BE REGISTERED WITHIN 30 DAYS OF PURCHASE TO QUALIFY FOR WARRANTY.