User's Manual

NAUTIZ X8 MANUAL
21 handheld
Stylus and tether
The Terminal is shipped with a stylus that stores in a loop on the handstrap when you’re not using it; see
Using the Stylus in paragraph 3.8.
4.8. Battery Cavity Layout
4.9. Installing Memory Cards
The TERMINAL supports Micro Secure Digital (SD) memory cards up to 32GB. Sandisk, Kingstone and ATP
micro SD are recommended
To access the Micro SD card slot and insert the card, proceed as follows:
1. Press the Power key to put the terminal in Suspend Mode; see Suspend Mode on paragraph 4.23.
2. Remove the battery door on the back of the unit.
3. Remove the battery.
4. Insert the SD card with the label facing upward.
NOTE: To remove an installed SD card, tap on the edge lightly to unlock the card; the card will pop out just
enough for you to grab its edge and pull it out.
5. Replace battery and battery door.
6. Tap the Power key to resume operation.
7. To verify that the operating system recognizes the new memory card, open Windows Explorer and navigate
to My Device\Storage Card.
Battery Pack Retainer
Micro SD slot
IMEI number (for WWAN)