Instructions / Assembly
Table Of Contents
- WHAT IS COVERED
- WHAT IS NOT COVERED
- Pre-Installation
- Planning Installation
- Tools Required
- Hardware included
- Pre-Installation (continued)
- Package Contents
- LO QUE ESTA CUBIERTO
- LO QUE (NO) ESTA CUBIERTO
- Pre-Instalación
- PLANIFICACIÓN DE LA INSTALACIÓN
- HERRAMIENTAS NECESARIAS
- HARDWARE includio
- Pre-Instalación (continuación)
- CONTENIDO DEL PAQUETE
- CE QUI EST COUVERT
- CE QUI EST COUVERT (ET PAS)
- Pré-Installation
- PLANIFICATION DE L'INSTALLATION
- OUTILS REQUIS
- MATERIEL inclus
- Pré-Installation (suite)
- CONTENU DE L'EMBALLAGE
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Attaching the mounting plate to
the outlet box
2
Connecting the electrical
wires
□ Place the mounting plate (AA) in front of the outlet box
(sold separately). Make sure the two horizontal edges
of the mounting plate (AA) are facing left/right.
□ Ensure the wires from the outlet box are either inside
the outlet box, or through the hole in the center of the
mounting plate (AA).
□ Place the outlet box screws (CC) through the long oval
holes on the mounting plate (AA) and use a Philips
screwdriver to screw the outlet box screws (CC) into
the appropriate screw holes on the outlet box.
□ Wrap the middle of the ground wire from the
fixture around the ground screw (DD) on the
mounting plate (AA). Use a wire connector (EE)
to connect the end of the ground wire from the
fixture to the ground wire from the outlet box.
□ Use a wire connector (EE) to connect the white
wire from the fixture to the white wire (neutral
wire) from the outlet box.
□ Use a wire connector (EE) to connect the black
wire from the fixture to the black wire (live
wire) from the outlet box.
□ Wrap the three wire connections with electrical
tape for a more secure connection.
□ Position the wires inside the outlet box.