Use and Care Manual

Page 10
Assembly Step 8
Regulator
Connect the lantern hose to the
regulator hose and secure tightly with
adjustable wrenches. Then attach the
regulator to the cylinder, turn clockwise
to tighten it securely. Place cylinder in
position as shown.
Note: The cylinder must be positioned
as shown in the patio heater cylinder
chamber to provide vapor withdrawal.
Check for Leaks
Your patio heater has been checked at
all factory connections for leakage. To
check the connection at the gas hose/
regulator/cylinder
1. Make leakage solution by mixing 50%
water with 50% liquid dish soap.
2. Brush several drops of the solution
onto the gas hose/regulator/cylinder
and hose connection.
3. Turn on the gas cylinder valve.
Inspect the connections and look for
bubbles.
4. If no bubbles appear the connection
is safe.
5. If bubbles appear there is leakage,
loosen and re-tighten this connection.
If it still leaks, please contact
customer service on [e-mail]
or [phone].
Position gas cylinder
inside cylinder
chamber as shown
securing with chain.
Points for leak testing
Regulator / Cylinder
Hose / Regulator
First, connect hose
to regulator securely
using adjustable
wrenches
Second, screw
regulator
onto gas cylinder