Instructions / Assembly

Installation (continued)

□

Making the electrical connections

Green ground screw

* Use wire connectors (CC) to connect the wires.

Ground Wire:

1. Wrap the supply ground wire around the green ground screw

on the crossbar assembly (AA), no less than 2 in. from the end

of the wire. Tighten the ground screw.

2. Connect the xture ground wire to the supply ground wire

with a wire connector (CC).

Supply Wire:

1. Connect the supply white wire to the white xture supply

wire with a wire connector (CC).

2. Connect the supply black (or red) wire to the black xture

supply wire with a wire connector (CC).

3. Wrap each connection with approved electrical tape and

carefully insert all of the connected wires into the outlet box.

Align the holes on the shade (B) to the threaded holes on the

socket. Secure the shade (B) by threading the lock screws (C)

onto the threaded holes. Hand-tighten until snug.

Install the correct bulbs (not included) referring to the xture

markings and/or labels for maximum wattage.

NOTE: Use (3) 60W maximum medium base (E26) type "S"

or 8W maximum medium base (E26) self-ballasted LED

vintage Edison bulbs (sold separately).

□

Installing the xture body to outlet box

Re-attach the xture body (A) to the crossbar assembly (AA).

Secure with the previously removed hex nut (2).

Then, attach the lock ball (1) over the ceiling canopy of the

xture body (A).

□

Installing the shade and the light bulbs