Use and Care Manual
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Assembling the xture
NOTICE: The spike is located inside the post.
WARNING: Never push the xture into the ground by the
xture head or use a hammer to insert the spike into the
ground.
□ Install the top cap (A) on the body (B) by turning it
clockwise.
□ Attach the plastic spike (D) to the post (C) by pressing them
together and press the post (C) into the bottom of the body
(B) base.
□ Turning on the light
Select R (Rotating) or ON.
2
Replacing the battery
NOTICE: This operation should be done in the morning on a sunny
day. This will allow the lantern to receive a full 8 hours of sunlight so
that the rechargeable battery/batteries can reach maximum capacity.
□ Remove the top cap (A) by turning it counterclockwise.
□ Remove the battery cover by removing the 3 screws.
□ Remove the old 600 mAh battery and replace it with a new
AA size 1.2V, Ni-Mh, 600 mAh rechargeable battery.
NOTICE: Clean the battery contacts and those of the device prior to
battery installation.
□ Be sure to insert the battery in the proper direction.
□ Replace the battery cover and securely screw in the 3
screws.
□ Replace the top-cap by turning clockwise.
A
Battery
Screws
Battery Cover
C
B
A
D
RON
RON
RO
N