Instructions / Assembly

Assembly

Attaching the legs to the table top rim

Place the table top rim (A) upside down so the pre-drilled

corner holes are visible.

Align and attach each of the four table legs (D) in the

corners of the table top rim (A), by inserting bolts (AA) with

metal washers (BB) through the pre-drilled holes.

Loosely tighten with the hex wrench (DD).

IMPORTANT: Each of the 4 leg bolts should be attached

and initially tightened only a few revolutions. Then tighten

further, one at a time, alternating between the 4 legs.

Do NOT fully tighten one leg before you attach the other legs.

Attaching the leg connector bracket

to the legs

Attach the leg connector bracket (C) to each of the table legs

(D) by inserting bolts (AA) with metal washers (BB) into the

pre-drilled holes. Loosely tighten with the hex wrench (DD).

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

IMPORTANT: Do not tighten completely until

assembly is completed.