Instructions / Assembly
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- Slide Number 6
- Slide Number 7
- Slide Number 8
- Slide Number 9
- Slide Number 10
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- Slide Number 20
- Slide Number 21
- Slide Number 22
- Slide Number 23
- Slide Number 24
1
Mounting the hardware
Use the mounting bracket (GG) and mark the center
hole and slots using a pencil. Repeat at the other
end of the marked location. Ensure that the
markings from center to center are be 22-1/4 in.
(567.5 mm) apart before drilling.
Drill holes at the slot markings using a drill and drill
bit suitable for your wall type. Push the wall anchors
(CC) in to the wall.
Pull the supply wires out from the outlet box and
mount the mounting bracket (GG) to the outlet box
using the mounting screws (EE).
Secure the accessory mounting plate (GG) onto the
wall by using anchor screws (EE).
5
2
Connecting the wires
Attach the lanyard on the fixture body (A) to the
mounting bracket (GG) to secure the fixture.
Connect the black supply wire to the black fixture
wire using a wire nut (DD).
Connect the white supply wire to the white fixture
wire using a wire nut (DD).
Connect the fixture ground wire to the supply
ground wire using a wire nut (DD).
Wrap all wire connections with electrical tape for a
more secure connection.
Installation
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further
assistance.
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.
EE
CC
GG
BB
DD