Installation Guide

Mounting the hardware

 Thread the fixture mounting screws (EE) into the

provided holes of the mounting bracket (GG).

 Thread the hex nuts (BB) onto the fixture mounting

screws (EE). Do not tighten the hex nuts (BB) at this

time.

 Pull the supply wires out from the outlet box and

mount the mounting bracket (GG) to the outlet box

using the bracket mounting screws (DD).

 Place the back plate of the fixture body (A) over the

outlet box and onto the fixture mounting screws

(EE).

 Adjust the fixture mounting screws (EE) until they

protrude out from the back plate 1/4 in.

 Remove the fixture body (A) and secure the position

of the fixture mounting screws (EE) by tightening

the hex nuts (BB) against the mounting bracket

(GG).

Connecting the wires

 Connect the black supply wire to the black fixture

wire using a wire nut (CC).

 Connect the white supply wire to the white fixture

wire using a wire nut (CC).

 Connect the fixture ground wire to the supply

ground wire using a wire nut (CC).

 Wrap all wire connections with electrical tape for a

more secure connection.

Installation

HAMPTONBAY.COM

Please contact 1‐855‐HD‐HAMPTON for further assistance.

NOTE: If you have electrical questions consult

your local electrical code for approved

grounding methods.