Item #000 000 Model #GFS00679B USE AND CARE GUIDE 10x10x10 SOLAR LED LIGHTED GAZEBO Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 6 p.m., EST, Monday - Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents ..................................................2 Warranty ................................................................2 What is Covered ..............................................................2 What is Not Covered .......................................................2 Safety Information .................................................2 Pre-Assembly ........................................................3 Planning Assembly ................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. NOTE: Hardware not shown to actual size. HARDWARE INCLUDED BB AA CC Part Description Quantity AA Screw 1+1 BB Ground spike 12 + 1 CC Screw driver 1 3 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued) PACKAGE CONTENTS O H G N C M E I D P J B L F A K Part Description Part Quantity Description Quantity A Pillar 6 I Corner connector 6 B Beam 6 J Connecting wire 8 C Top tube 4 K Pillar base plate 6 D Top tube with wire 1 L Knob 12 E Top tube with switch 1 M Center hook 1 F Slip fabric tube 6 N Large fabric cover 1 G Top tube hub 1 O Small fabric cover 1 H Solar energy receiver 1 P Side wall fabric 6 4
Assembly 1 Attaching the corner connectors and the pillar base plates to the pillars Lay the pillars (A) down on a soft surface. Attach the corner connector (I) to the pillar (A) as shown below. Attach the pillar base plate (K) the pillar (A) as shown below. Repeat this step for the remaining pillars (A). I I A A A K K 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 2 Connecting the beams to the pillars Attach the beam (B) in between two of the pillars (A) by inserting the knobs (L) and rotating clockwise as shown below. Repeat this step for the remaining pillars (A). NOTE: More than one person is required to assemble this step.
Assembly (continued) 3 Attaching the assembled pillars Attach the beam (B) in between the assembled pillars (A) by inserting the knobs (L) and rotating clockwise as shown below. Repeat this step for the remaining beams (B). NOTE: More than one person is required to assemble this step. B B L A B L A B A L A B B B B L L L A A B A A A 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 4 Attaching the center hook to the top tube hub Attach the center hook (M) to the top tube hub (G) using the screw (AA). Fully tighten the screw using the screw driver (CC).
Assembly (continued) 5 Attaching the top tube with wire and the top tube with switch to the top tube hub Connect the adapters in the top tube with wire (D) and the top tube with switch (E) to the adapters in the top tube hub (G). Attach the top tube with wire (D) and the top tube with switch (E) to the top tube hub (G). G G E G E E D 9 HOMEDEPOT.CA Please contact 1-877-527-0313 for further assistance.
Assembly (continued) 6 Attaching the top tube with wire and the top tube with switch to the corner connectors Attach the top tube with wire (D) and the top tube with switch (E) to the corner connectors (I) as shown below. NOTE: More than one person is required to assemble this step and suggest using a stepladder.
Assembly (continued) 7 Attaching the top tubes to the top tube hub and the corner connectors Attach one end of the top tubes (C) to the top tube hub (G) as shown below. Attach the other end of the top tubes (C) to the corner connectors (I) as shown below. NOTE: More than one person is required to assemble this step and suggest using a stepladder. G G C I C C D 11 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 8 Attaching the large fabric cover Place the large fabric cover (N) onto the assembled frame.
Assembly (continued) 9 Attaching the solar energy receiver and the small fabric cover Make sure the solar energy receiver (H) goes through the small fabric cover (O). Connect the adapter on the solar energy receiver (H) to the adapter on the top tube hub (G). Attach the solar energy receiver (H) to the top tube hub (G) by turning clockwise. Attach each corner of the small fabric cover (O) by fully extending the fabric to the assembled top tubes (C), (D), and (E). H H O O G O C&D&E O 13 HAMPTONBAY.
Assembly (continued) 10 Attaching the large fabric cover Attach the connecting wires (J) to the plugs on the beams (B) as shown below. Attach the connecting wires (J) to the adapters on the top tube with wire (D) and to the top tube with switch (E) as shown below.
Assembly (continued) 11 Tying the large fabric cover to the beams Tie the large fabric cover (N) to the beams (B). NOTE: Do not fully extend the large fabric cover (N) over the beams (B). N N B 15 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 12 Attaching the slip fabric tube to the corner connector Attach the slip fabric tubes (F) to the corner connectors (I) as shown below. Repeat this step for the other slip fabric tubes (F).
Assembly (continued) 13 Tying the side wall fabric to the slip fabric tube Tie the side wall fabric (P) to the slip fabric tubes (F). Fully extend the large fabric cover (N) over the beams (B). P F N P 17 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 14 Securing the pillar base plates to the ground Secure the pillar base plates (K) to the ground by using the ground spikes (BB). Make sure the pillar base plates (K) are totally grounded. A K BB Care and Cleaning For the best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 6 p.m., EST Monday - Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
