Instructions / Assembly

Installation

Securing the light ﬁxture

 Secure the light ﬁxture (A) to the junction box by placing

it over the support screws on the mounting

unit (AA) and securing it with the cap nuts (DD).

Attaching the mounting unit to the

junction box

Making the electrical connections

 Connect the copper wire on the light ﬁxture (A) to the

mounting unit (AA) by securing it with the pre-installed

ground screw.

 Connect the black to black wire (power), the white to

white wire (neutral), and the copper wire to the ground wire

with wire nuts (CC) and secure with electrical tape

(not included).

NOTE: If the wires from the ﬁxture are the same color,

attach the side with markings or letters to the black

(positive) wire and the other to the white (neutral) wire.

 Attach the mounting unit (AA) to the junction box (not

included) with mounting screws (BB).

NOTE: The pre-installed support screwson the

mounting bracket (AA) should protrude outaway

from the junction box.

Installing the light bulbs

 Install 2 E12 60-watt bulbs (not included)

5 Please contact 1-855-HD-HAMPTON for further assistance.

HAMPTONBAY.COM