Instructions / Assembly

Operation

PULL CHAIN OPERATING INSTRUCTIONS

Install two pull chains and fobs (NN) onto the pull chains located in

the light kit (L) and switch housing (ZZ). Turn on the power and

check the operation of the fan.

The pull chain controls the fan speed as follows:

1 pull - High, 2 pulls - Medium high, 3 pulls - Medium, 4 pulls -

Low and 5 pulls - Off.

Speed settings for warm or cool weather depend on factors such

as the room size, ceiling height, and number of fans.

To turn the light kit on or off, pull the chain that is attached to

the light kit (L).

NOTE: Wait for the fan to stop before reversing the direction

of the blade rotation.

REVERSE SWITCH OPERATING INSTRUCTIONS

The reverse switch is located on the surface of the switch housing.

Slide the switch to the left for warm weather operation. Slide the

switch to the right for cool weather operation.

Warm weather - (Counterclockwise Direction) A downward air ﬂow

creates a cooling effect. This allows you to set your air conditioner

on a warmer setting without affecting your comfort.

Cool weather - (Clockwise Direction) An upward air ﬂow moves

warm air off the ceiling. This allows you to set your heating unit on

a cooler setting without affecting your comfort.