Use and Care Manual

10
Installing the Light Bulb and Glass Shade
CAUTION
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE
AT FUSE BOX. TURNING POWER OFF USING
THE FAN SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRIC SHOCK.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
Install 1x13 Watt compact fluorescent bulb
(included). NOTE: CFL bulbs are NOT
dimmable.
Gently slide the glass shade over the steel
tensioners. Make sure the glass shade is fully
inserted into the socket for a secure fit. (Fig.
16).
1.
2.
Figure 16
Bulb
Steel Tensioners
Glass Shade
Fan without Light Kit
(Optional)
Disassemble the switch housing cover from the
light kit, you can keep the light kit for future
use.
Attach the plastic plug to the switch housing.
(Fig. 17)
Install the switch housing cover to the switch
housing with screws provided.
1.
2.
3.
Figure 17
Screws
Switch Housing
Cover
Plastic Plug
Switch Housing