Instructions / Assembly

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly — Attaching the Fan Blades

Removing the rubber packing mounts

The fan motor assembly (E) is shipped with rubber packing

mounts (JJ) to prevent movement during transportation.

Remove the ve rubber packing mounts (JJ) from the fan

motor assembly (E) and discard prior to attaching the blade

arms (G).

Attaching the blades to the blade arms

Attach the blades (F) to the blade arms (G) using the three

blade attachment screws and ber washers (BB). Insert a

blade attachment screw and ber washer (BB) into the blade

arm (G), but do not tighten.

Repeat for the two remaining screws and ber washers (BB).

Tighten each screw securely starting with the center screw.

Make sure the blade (F) is straight.

Repeat these steps for the remaining blades.

Fastening the blade assemblies to

the motor

Fasten the blade assemblies to the fan motor assembly (E)

by lining up the slots (KK) of the motor with the tabs (LL) on

the blade arms (G).

Tighten the two blade arm screws with lock washers (MM)

already installed in the blade arms (G).

Repeat this procedure for the remaining blade arms (G).

WARNING: To reduce the risk of personal injury, do not bend

the blade arms (G) while installing, balancing the blades (F),

or cleaning the fan. Do not insert foreign objects between

rotating fan blades (F).

NOTE: Your fan blades are reversible. Select the blade side

nish which best accentuates your decor.