Instructions / Assembly

Assembly — Installing the Light Kit

Installing the LED light kit to the

light kit mounting plate

Installing the glass shade

While holding the 20W LED light kit (I) under the fan motor

assembly (H), snap together the wire connection plugs (OO):

- White to white

- Black to black

Position the notches (PP) in the outer rim of the 20W LED

light kit (I) so they line up with the tabs (QQ) on the inside of

the rim on the light kit mounting plate (RR). Carefully lift the

20W LED light kit (I) up inside the light kit mounting plate (RR)

and secure it to the fan by turning the 20W LED light kit (I)

clockwise until snug. DO NOT OVERTIGHTEN.

Position the notches (SS) in the outer rim of the glass shade

(J) so they line up with the tabs (TT) on the inside of the rim

on the 20W LED light kit (I). Carefully lift the glass shade (J)

up inside the 20W LED light kit (I) and secure it to the fan by

turning the glass shade (J) clockwise until snug. DO NOT

OVERTIGHTEN.

CAUTION: Before starting installation, disconnect the power

by turning off the circuit breaker or removing the fuse at the

fuse box. Turning power off using the fan switch is not sufcient

to prevent electric shock.