XXX XXX/82704/23WM5440-T401 XXX XXX/82711/23WM5440-E451 XXX XXX/82728/23WM5440-O135 XXX XXX/82735/23WM5440-C240 USE AND CARE GUIDE CULVER HAMMERED ELECTRIC FIREPLACE Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this electric fireplace.
Table of Contents Maximum Load Warning............................................ 2 Safety Information...................................................... 3 Warranty...................................................................... 4 Pre-Assembly.............................................................. 5 Hardware Included ................................................... 5 Product Specifications........................................................ 5 Tools Required...........................
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-5270313, 8 a.m.-6 p.m., EST, Monday-Friday. WARNING: This appliance is not a toy. Supervise children When using electrical appliances, always follow basic precautions to reduce the risk of fire, electrical shock, and injury to persons including the following: playing near it. 1.
Warranty 1 Year Limited Warranty: The manufacturer warrants this product to be free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations: 1. Install and operate this Electric Fireplace in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.
Pre-Assembly HARDWARE INCLUDED AA Part AA BB CC DD ZZ CC BB Description Bolt PH-BLTBLK001 Washer PH-WSRBLK001 Wood Dowel PH-DWLNTL001 Insert Mounting Bracket PH-BKTZNC001 Touch-up Pen Model DD ZZ Quantity 24 24 18 2 1 PRODUCT SPECIFICATIONS Voltage 120 V, 60 Hz Amps (with heater) 11.7 Amps Amps (without heater) < 0.1 Amps Watts (with heater) 1400 Watts Watts (without heater) < 10 Watts PLANNING ASSEMBLY Before beginning assembly of product, make sure all parts are present.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit.
Assembly 1 2 Installing the decorative panel Installing the side panel Attach Left Side Panel (B) and Right Side Panel C) to the completed assembly from Step 1. Using Bolts (AA) and Washers (BB) attach panels through pre-drilled holes in the mounting blocks. HAND TIGHTEN ONLY. Locate the Left Front Panel (D), Right Front Panel (E), Center Front Panel (F), and set out face down on a scratch-free surface.
Assembly (continued) 4 5 Center Decorative panel installation Insert Wood Dowels (CC) into pre drilled holes in Center Front Pane (F) Push Center Decorative Panel (H) snug to Left Front Panel (D) and Right Front Panel (E). Using Bolts (AA) and Washers (BB) attach panels through pre-drilled holes in the mounting blocks. HAND TIGHTEN ONLY. Installing the Top Panel nsert one Wood Dowel (CC) into each of the pre-drilled holes on the top edges of the Assembly from step 3.
Assembly (continued) 7 Installing fireplace insert Install Insert From Back Lift insert carefully into the back of the unit and center in the insert opening. Do not drag insert across Hearth/Base (A) as it may scratch your unit.
Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. When a function is changed °C °F from the control panel or remote control there will be a corresponding indicator (see Figure 1) on the upper-right of the projection screen. The indicator shows the function changed and the level selected by the control panel or remote control. When the function is turned off, the corresponding indicator will flash several times and then fade off. Fig .
Operation (continued) 5 Replacing the remote control battery 6 Disposing of used batteries The battery may contain hazardous substances that could endanger the enviroment and human health. When the remote control stops operating or its range seems reduced, it is time to replace the battery with new ones. On the back end of the remote, press and slide the battery door open and remove the old battery. Insert 2 AAA batteries, checking that the + and sides of the battery match inside the battery com partment.
FCC/ICC Information This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION There is no power and the logs do not glow. There is no power to the unit. Check that the unit is plugged into a standard 120V outlet. Press the Power button several times, make sure power is set to the “ON”position. The logs glow but there is no flame effect. The flame effect turned off. Press the Flame button several times. This is normal operation. Check your heater cord and plug connections.
Replacement Parts For replacement parts, call our customer service department at 1-877-527-0313, 8 a.m.-6 p.m., EST, Monday-Friday. Description Part No. 23EF023GRA Qty.
Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HAMPTONBAY.COM RETAIN THIS MANUAL FOR FUTURE USE.