Full Product Manual

ManualsBrandsHampton Bay ManualsLightingSolar 15 Lumens Black Outdoor Integrated LED Lanai Deck Torch Light; Weather/Water/Rust Resistant

Table Of Contents

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly and Installation

Preparing for installation Install the solar light

□ Clip the assembly at the post and secure the clip with screws provided (F).

1 2

Item #1005 698 118

Model #62027

□ Firmly slide the wall mount clip (E)

into the solar housing (D).

□ FOR FIRST TIME USE: Twist

and remove the top cover (A)

from the housing (D).

□ Remove the pull tab between

the top cover (A) and housing

(D).

□ Replace the top cover (A) on the

housing (D).

Use and Care Guide

Solar LED Deck Light

PLANNING FOR A SUCCESSFUL ASSEMBLY

Read all instructions before assembly and installation.

Inspect each part for defects that may have occurred during shipping.

Keep your receipt and these instructions for proof of purchase.

CHOOSING THE RIGHT LOCATION

Install your solar light in a location with full, direct sunlight. Do not install in shaded areas as these areas will not allow the batteries to fully charge and will reduce

the nighttime operating hours for your light. Ensure that the installation location is away from other nighttime light sources such as street or porch lamps. These light

sources may prevent your solar light from automatically turning on.

HOW SOLAR WORKS

The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the

solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and

season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.

PACKAGE CONTENTS

BA C D E

A - Top cover x 1 B - AA 1.2V 1000mAh Ni-

Mh rechargeable battery

(pre-installed) x 1

D - Housing x 1 F - Screw x 2C - Battery cover x 1 E - Post mount

clip x 1

Summary of content (4 pages)

PAGE 1
Item #1005 698 118 Model #62027 Use and Care Guide Solar LED Deck Light PACKAGE CONTENTS A A - Top cover x 1 B B - AA 1.2V 1000mAh NiMh rechargeable battery (pre-installed) x 1 C C - Battery cover x 1 D D - Housing x 1 E F E - Post mount clip x 1 F - Screw x 2 PLANNING FOR A SUCCESSFUL ASSEMBLY Read all instructions before assembly and installation. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase.
PAGE 2
Maintenance Replacing the battery A CAUTION: When replacing the battery, use one (1) 1000 mAh NiMH AA 1.2V rechargeable battery. D IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. NOTE: For best performance, replace with a rechargable 1.2V NiMH battery of 1000 mAh or greater every 3 years or when performance diminishes. □ □ □ C B Twist and remove the housing (D) from top cover (A). Remove the battery cover (C).
PAGE 3
Artículo #1005 698 118 Modelo núm.62027 Guía de uso y cuidado Lámpara LED solar para terraza CONTENIDO DEL PAQUETE A A - Cubierta superior x 1 B C D C - Cubierta de la batería B - Batería AA x1 (preinstalada) recargable de NiMH de 1.2 V, 1000 mAH x 1 B - Carcasa x 1 E F E - Presilla de instalación en poste x 1 D - Tornillo x 2 PLANIFICACIÓN DEL ENSAMBLAJE EXITOSO Leer todas las instrucciones antes de ensamblar e instalar.
PAGE 4
Mantenimiento Cómo reemplazar la batería A PRECAUCIÓN: Al reemplazar la batería, usa una (1) batería recargable AA de NiMH de 1000 mAh y 1.2 V. D IMPORTANTE: Desechar las baterías de acuerdo con las regulaciones locales, estatales y federales. NOTA: Para un mejor funcionamiento, reemplazar con una batería recargable de NiMH de 1.2 V y 1000 mAh cada 3 años o cuando el rendimiento disminuya. □ □ □ C B Girar y quitar la carcasa (D) de la cubierta superior (A). Quitar la cubierta de la batería (C).