Item # 1003102890 1003102891 Model # 54486111 54486112 Use and Care Guide LED WRAP LIGHT WITH SELECTABLE COLOR TEMPERATURE Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this LED light.
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required. . . . . . . . . . .
Pre-Installation PLANNING INSTALLATION Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. NOTE: Keep your receipt and these instructions for proof of purchase.
Installation Select a suitable location that can support the weight of the fixture. Determine the method of mounting before drilling. WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker before removing the existing light fixture or installing the new one. With power disconnected to your electrical box, remove the existing fixture.
Installation (continued) 3 Feeding the wires □□ Feed the electrical connection wires through any knock out hole and then through the mounting bracket (BB). The connection wires can be held in place by the metal tabs, if needed. Metal tabs BB A Knock out holes 4 5 Making the electrical connections □□ Insert the hot and neutral (black and white) wires from the electrical box into the wire connectors of the same color wires from the housing (A).
Installation (continued) 6 Attaching the housing to the ceiling □□ Drill a 1/8 in. pilot hole into the screw locations marked on the ceiling. You can also use an awl or nail to dimple the screw holes. □□ Install a drywall anchor (DD) and a mounting screw (AA) in each drilled mounting hole, but do not tighten fully. □□ Align the 4 mounting keyholes on the housing (A) with the 4 mounting screws in the ceiling.
Adjusting the Color Temperature of the Light This LED light fixture allows you to customize the color temperature of the light using three settings: soft white, bright white, or daylight. □□ Choose your favorite correlated color temperature (CCT) from three options: 3000k Soft White, 4000k Bright White, or 5000k Daylight. □□ Move the toggle switch on the housing (A) to make your selection before attaching the diffuser (B) to the housing (A).
Care and Cleaning CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. □□ Clean the fixture with a soft, dry cloth. □□ Do not use cleaners with chemicals, solvents, or harsh abrasives. □□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture. Troubleshooting WARNING: Before doing any work on the fixture, disconnect power to the light fixture.
Notes 9 HAMPTONBAY.cOM Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo # 1003102890 1003102891 Modelo # 54486111 54486112 GUÍA DE USO Y CUIDADO LÁMPARA LED ENVOLVENTE CON TEMPERATURA DE COLOR DE LUZ AJUSTABLE ¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Hampton Bay en el horario de 8 a.m. - 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. - 6 p.m., Hora del Este de EE.UU., sábados. 1-855-HD-HAMPTON HAMPTONBAY.
Contenido Contenido. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Información sobre seguridad.. . . . . . . . . . . . . . . . . . . . . . . . . 12 Garantía. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Antes de la instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Planificación de la instalación. . . . . . . . . . . . . . . . . . . . . . . . 13 Herramientas necesarias. . . . . . . . . . . . . . . . . . . .
Antes de la instalación PLANIFICACIÓN DE LA INSTALACIÓN Antes de comenzar el armado, instalación u operación del producto, asegúrese de que tiene todas las piezas. Compare las piezas con la lista de contenido. Si alguna de las piezas faltara o estuviera dañada, no proceda a armar, instalar u operar el producto. Comuníquese con el servicio al cliente para consultar por las piezas de reemplazo. NOTA: Guarde el recibo de compra y estas instrucciones como prueba de compra.
Instalación Seleccione un sitio adecuado que soporte el peso del aparato de iluminación. Determine el método de montaje antes de hacer los orificios. ADVERTENCIA: RIESGO DE DESCARGA ELÉCTRICA. Asegúrese de cortar el suministro eléctrico en los cables con los que trabajará. Extraiga los fusibles o apague el cortacircuitos antes de quitar el aparato de iluminación existente o instalar uno nuevo. Antes de retirar el aparato existente, desconecte la energía hacia la caja eléctrica.
Instalación (continuación) 3 Pasar los cables □□ Pase los cables por uno de los orificios ciegos y luego a través del soporte de montaje (AA). La conexión de cables puede mantenerse en el lugar con las pestañas de metal, si es necesario. Pestañas metálicas BB A Orificios ciegos 4 Hacer las conexiones eléctricas □□ Inserte los cables energizado y neutro (negro y blanco) de la caja eléctrica en los conectores de los cables del mismo color de la carcasa (A).
Instalación (continuación) 6 Unir la caja al techo □□ Taladre un orificio piloto de 1/8 pulgadas en los sitios de los tornillos marcados en el techo. También puede usar una lezna o clavo para marcar los orificios de los tornillos. □□ Instale un anclaje para pirca (DD) y un tornillo de montaje (AA) en cada uno de los orificios, pero no los apriete completamente. □□ Alinee los 4 orificios de montaje en la caja (A) con los 4 tornillos de montaje en el techo.
Ajustar la temperatura del color del luz Este lámpara LED le permite ajustar la temperatura del color de la luz usando tres ajustes: blanco suave, blanco brillante, o luz del día. □□ Cambie la temperatura de color correlacionada (CCT) favorita de tres opciones: 3000k Blanco cálida, 4000k Blanco frÍo, o 5000k Luz del día. □□ Mueva el conmutador en la placa de fijación (A) para hacer su selección antes de empujar el difusor (B) a la placa de fijación (A).
Cuidado y limpieza PRECAUCIÓN: Antes de limpiar el aparato, desconecte el suministro eléctrico hacia este apagando el cortacircuitos o extrayendo el fusible de la caja de fusibles. □□ Limpie el aparato con un paño suave y seco. □□ No utilice limpiadores con productos químicos, solventes o abrasivos. □□ No use limpiador líquido en las bombillas LED, en la unidad LED ni en los cables que están dentro del aparato.
Notas 19 HAMPTONBAY.cOM Comuníquese al 1-855-HD-HAMPTON para solicitar asistencia.
¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Hampton Bay en el horario de 8 a.m. - 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. - 6 p.m., Hora del Este de EE.UU., sábados. 1-855-HD-HAMPTON HAMPTONBAY.COM Conserve este manual para uso futuro.