Use and Care Manual

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Hanging the Fan

Hanging the fan-motor assembly

Attaching the fan to the electrical

box

□ Turn the power off.

□ Securely attach the mounting plate (A) to the outlet box (FF)

using the two screws (LL) supplied with the outlet box (FF).

Pull the 120-volt supply wires (the black, white and ground

wires) out of the outlet box (FF) and through the hole in the

mounting plate (A) and lay them to the side.

□ Carefully lift the fan-motor assembly (B) and engage the

slot in the motor bracket on the top of the fan- motor

assembly (B) with the hook on the mounting plate (A) so

that it is securely suspended. Then connect the wiring

to your fan according to step 3 “Making the Electrical

Connections”.

□ Once the wiring is complete, lift the motor bracket on the

top of the fan-motor assembly (B) so that the four captive

screws (DD) in the motor bracket align with the four screw

holes (II) in the mounting plate (A).

□ Securely tighten all four screws (DD).

NOTE: For better fan performance, make sure the

mounting plate is level. Additional washers (HH)

(not included) may be needed to insert between

the outlet box and mounting plate.