Instructions / Assembly

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Fastening the blade assemblies to

the motor

□ Fasten the blade assembly to the fan-motor assembly (D)

by inserting the alignment post into the slot on the bottom

of the motor and tightening the blade bracket (H) screws.

The blade bracket screws are pre-installed into the blade

bracket (H).

□ Repeat this step for the remaining blade assemblies.

□ Replace the rubber plug (HH).

WARNING: Replace the rubber plug (HH) to prevent water from

entering the switch housing and to reduce the risk of re,

electric shock, or other personal injury.

IMPORTANT: Remove the rubber plug (HH) on the switch cup

(RR) below the motor in order to remove the shipping retainer

(OO) on the bottom of the motor assembly.

Assembly - Attaching the Fan Blades (continued)

Removing shipping retainer

□ Remove and save the rubber plug (HH) in the access hole (KK)

of the switch cup (RR) below the motor assembly (D).

□ Insert the screw driver through the access hole (KK) and

remove the ve shipping retainer screws (PP). Rotate the

shipping retainer (OO) as needed to remove the screws.

□ Remove and discard the shipping retainer (OO) and shipping

retainer screws (PP).

IMPORTANT: The switch cup (RR) has an access hole (KK) to

allow the screwdriver to reach the shipping retainer screws

(PP).

IMPORTANT: The switch cup (RR) has an access hole (KK)

to allow the screwdriver to reach the screws on the blade

bracket (H).