Item #1002 720 246, 1002 714 876 Model #91398, 91399 UL model #52-MAL USE AND CARE GUIDE MARLOWE 52-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday. 1-855-HD-HAMPTON HAMPTONBAY.COM To view an instructional video on how to install this product: 1. Go to www.homedepot.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A G H B I C D J K E L F M Part Description Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly C Part Description Quantity G Blade 5 H Blade bracket 5 1 I Light kit fitter assembly 1 Canopy with canopy ring attached 1 J Glass bowl 1 D Decorative motor collar cover 1 K Receiver 1 E Fan-motor assembly 1 L Remote control (batteries included) 1 F Light kit pan 1 M LED light bulb, 9.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 35lbs. (15.9 Kg) or less” and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □□ Remove the canopy ring (HH) from the canopy (C) by □□ Route the wires exiting the top of the fan motor (E) into the decorative motor collar cover (D) and through the canopy ring (HH). turning the ring counter-clockwise until it unlocks. □□ Remove the mounting bracket(A) from the canopy (C) by □□ □□ Make sure the slot openings are on top and route the wires through the canopy (C) and then through the ball/ downrod assembly (B).
Assembly - Hanging the Fan 4 5 Attaching the fan to the electrical box □□ Carefully lift the fan-motor assembly (E) up to the slide-on WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 35lbs. (15.9 Kg) or less” and use screws provided with the outlet box. mounting bracket (A). □□ Seat the hanger ball portion of the ball/downrod assembly (B) in the mounting bracket socket.
Assembly - Hanging the Fan (continued) 7 8 Installing the receiver WARNING: To reduce the risk of fire or electric shock, remember to disconnect power. The electrical wiring must meet all local and national electrical code requirements. The electrical source and fan must be 110/120 volt, 60Hz. WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring.
Assembly - Hanging the Fan (continued) 9 10 Wiring the fan to the receiver WARNING: Each wire nut supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan.
Assembly - Hanging the Fan (continued) 11 Mounting the fan FF A WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. HH □□ Align the locking slots of the canopy (C) with the two screws □□ □□ □□ C in the slide-on mounting bracket (A). Push up to engage the slots, and turn clockwise to lock the canopy (C) in place.
Assembly - Attaching the Light Kit 14 15 Attaching the light kit pan □□ Remove one screw (P) from the light kit pan (F). Loosen, but CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing the light kit. □□ □□ Remove one screw (N) from the black bracket below the □□ Attaching the light kit fan-motor assembly (E). Loosen, but do not remove the other two screws.
Operation Warm weather - (Forward) A downward airflow creates a cooling effect. This allows you to set your air conditioner on a warmer setting without affecting your comfort. NOTE: The reverse switch is located at the top of motor housing. Shut the fan off and wait until the blades have completely stopped before flipping the switch to reverse the direction of your ceiling fan. Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
