Item #1008 601 958 1008 590 298 Model #AK363HB-BN AK363HB-MBK 1008 601 948 1008 601 945 AK363HB-BN+V7 AK363HB-MBK+V9 USE AND CARE GUIDE 54 IN. CEVA INDOOR/COVERED OUTDOOR CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Visual instruction of how to install this fan: Visit www.homedepot.
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pre-installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Assembly . . . . . . . . . . . . . . . .
Warranty The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any glass), to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED AA Part AA BB CC 23A 12V NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A B C E D G F Part Quantity Part A Description Mounting plate 1 E Fan motor assembly 1 B Canopy ring 1 F Light kit assembly 1 C Blade 5 G Remote control 1 D Blade support plate (with screws and lock washers) 5 5 Description Quantity HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Installation MOUNTING OPTIONS Hanger Bar WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly — Hanging the Fan 1 2 Attaching the mounting plate to the electrical box Hanging the fan to the mounting plate WARNING: To reduce the risk of fire, electric shock or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box. WARNING: The hook is only to hold the fan while attaching wiring. Failure to hang as instructed may result in the hook breaking causing the fan to fall.
Assembly — Hanging the Fan (continued) 3 Setting up the remote control G FF NOTE: The frequencies on your receiver and remote control have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and remote control are set to the same frequency. The dip switches on the remote control are located inside the battery compartment. BB NOTE: The frequency switches on the receiving unit are covered with a rubber cover.
Assembly — Hanging the Fan (continued) 4 Making the electrical connections WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts, except for the ground wire. Black White Ground conductor CAUTION: Do not use with a wall light dimmer switch. Outlet Box A NOTE: The fan must be installed at a maximum distance of 20 ft. from the remote control for proper signal transmission between the remote control and the fan's receiving unit.
Assembly — Hanging the Fan (continued) 5 Attaching the fan motor assembly to the mounting plate A II Remove two of the four motor mounting screws with lock washers (GG) from the motor assembly (E) and loosen the other two screws with lock washers (GG). (Do not remove.) GG GG Remove the fan motor assembly (E) from the mounting plate hook (EE), and engage the key holes on the mounting plate (A) with the two motor mounting screws with lock washers (GG) previously loosened.
Assembly — Attaching the Fan Blades 6 Attaching the fan blades E WARNING: To reduce the risk of personal injury, do not insert foreign objects between rotating fan blades (C). Insert the blade (C) through the slot on the motor. Align the holes on the blade (C) and the fan motor assembly (E) and secure the blade in place with blade support plate with screws and lock washers (D) provided. C Repeat this process to attach the other blades (C). D 11 HAMPTONBAY.
Assembly — Installing the Light Kit 7 Attaching the LED light kit to the light kit mounting plate CAUTION: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box. Turning power off using the fan switch is not sufficient to prevent electric shock. NOTE: If the light kit could be wobbled by hand, it means the light kit is not twisted completely till the right position. Keep twisting the light kit till it could not be wobbled by hand.
Operation Power ON/OFF: Press and release the power button to turn the fan and light on or off. Fan speed: LEDs on the fan speed button will illuminate to the corresponding speed. Press and release 1 time: turns the fan on high speed. Press and release 2 times: turns the fan on medium speed. Press and release 3 times: turns the fan on low speed. Press and release 4 times: turns the fan off. G Light ON/OFF Press and release the button to turn the light on or off.
Operation (continued) REVERSE SWITCH OPERATING INSTRUCTIONS The reverse switch is located on the surface of the motor housing. Slide the switch to the left for warm weather operation. Slide the switch to the right for cool weather operation. Reverse switch NOTE: Wait for the fan to stop before reversing the direction of the blade rotation. Warm weather - (Counterclockwise Direction) A downward air flow creates a cooling effect.
Care and Cleaning Do Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling. Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
