Use and Care Manual

HAMPTONBAY.com
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
CHOOSING THE RIGHT LOCATION
Your solar lights should be installed in an area that gets DIRECT SUNLIGHT. Your solar lights
will produce more hours of operation when installed in an area which is free from cover,
shade, or shadowing.
2
ATTACHING THE GROUND
STAKE
Align the ground stake (C) to the
screw (B) on the solar top housing
(A).
Tighten the screw (B) using a
clockwise motion.
A
C
B
3
TURNING THE SWITCH TO AUTO”
Put the switch, located under the solar
panel, to the AUTO position.
“AUTO/OFF”
Switch
4
INSERTING THE SPOTLIGHT
INTO THE GROUND
Push the spotlight into the
ground. Do not push down on the
solar panel as this could damage
the light.
CAUTION: Do not use hammer.
If ground is hard, use water to soften.
A
5
YOUR SPOTLIGHT IS READY!
The more sunlight received during the
day, the longer the light will operate
that night. Therefore, operating times
will vary by specific location, daily
weather conditions, and season.
Safety Information
Please note the following important safety notes:
1. The ground stake is sharp. Handle with care to avoid injury.
2. Clean the solar panel with a damp cloth. Do not use any chemicals or abrasives.
3. Keep the solar panel free of dirt and debris.
4. Do not dispose of battery in fire. Dispose of batteries in accordance all local, state and
federal regulations.
WARNING: Do not use hammer. If ground is
hard, use water to soften.
DANGER: Ground stake is sharp. Handle with
care.
IMPORTANT: Dispose of batteries in accordance
with all local, state and federal regulations.
PACKAGE CONTENTS
Use and Care Guide
Solar Powered LED
Bronze Spotlight
Item #1001 486 696
Model #0045-0BZ-01FJ
Part Description Quantity
A Solar Top Housing 1
B Screw 1
C Ground Stake 1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A
B
C

Summary of content (2 pages)